A third test aircraft focused on cabin and interior systems evaluations is eventually expected to join the two now in the program, he notes.īoeing has also completed flight tests of the shorter-fuselage 737-7 and has “finalized all of our paperwork associated with the certification with the FAA on that airplane,” Fleming says. Flight tests of the baseline 737-10, which began with the first flight on June 18, are going well, Fleming says. The revised system will be flight-tested on the 737-10 in 2022 and is likely to be rolled in as a retrofit to the MAX following certification of the stretched derivative, planned for 2023. “And then, if we determine that we have an erroneous signal, we’ll suppress that, and you won’t get the issue.”
The enhanced system will monitor five different parameters “that will help us determine whether we have an erroneous signal or not,” Fleming said at the Dubai Airshow, updating Boeing’s progress. “Even after all these monitors that we added into the airplane, if, for whatever reason, you have an erroneous AOA indication, and you got the stickshaker which tells you you’re approaching a stall, the pilots could shut that off.” “We’re putting more monitors onto the airplane, which would catch any kind of erroneous AOA indication that you would have, and then we’re also adding a switch,” Mike Fleming, senior vice president of commercial customer support and commercial derivative programs, says of the 737 MAX return to service. Although the European Union Aviation Safety Agency (EASA) originally pushed for the addition of a third sensor to calculate a reading independently to supplement the two existing ones, it subsequently agreed last January to allow the MAX to return to service after Boeing committed to develop a “synthetic” sensor pulling AOA data from different sources. before triggering nose-down stabilizer inputs. Neither crew reacted as Boeing’s hazard assessment anticipated, and both aircraft crashed after uncontrollable dives triggered by repeated MCAS activations.Īmong FAA-mandated changes Boeing made to the MCAS is a way to ensure the two sensors compare AOA readings and are within 5.5 deg.
Aim 120 max aoa software#
In the two fatal accidents-involving Lion Air Flight 610 in October 2018 and Ethiopian Airlines Flight 302 in March 2019-the MCAS activated based on faulty AOA data that told the aircraft’s flight control software its nose was too high just after takeoff. The MCAS, which automatically adjusts the horizontal stabilizer based on AOA data, was added to the 737’s speed trim system to ensure the MAX handled like its predecessor, the 737 Next Generation, during certain flight profiles. The aircraft was cleared to return to service in late 2020, pending design changes that included modifications to the existing AOA system and the longer-term development of further enhancements.īoth accidents were linked to problems with the maneuvering characteristics augmentation system (MCAS) software added to the 737 MAX. Boeing has completed the critical design review of an enhanced angle-of-attack (AOA) system for the 737 MAX and will flight-test the improvements on the stretched 737-10 variant in 2022.įaulty AOA data was a factor in two fatal 737-8 accidents that led to the grounding of the MAX family in March 2019.
0 kommentar(er)
